Throughout the duration of Transmediale 2010 F.A.T. members met in Berlin and produced a series of projects dedicated to the topic week FUCK GOOGLE. Additional to free software, browser addons, live streams, communiques and on site workshops F.A.T. lab built a fake Google Street View car and conquered the city of Berlin! All FG projects!
Now it’s your turn! Go out there and see what it is like to be Google!
Download the instruction PDF here!
Step 1: Find the correct car:
Do some research on Google images and pick the exact car model used by Google in your city. Contact your local car rental. Rent or buy the specific roof-rack for that car.
Original Google Street View car Germany (2006 – 2008, last seen in Berlin Oct. 2009)
Fake Google Street View car by F.A.T. during Transmediale Berlin 2010
Step 2: Materials:
(x1) PVC tubing 11 cm diam. – 140 cm (main pole)
(x2) wooden boards 100 x 16 x 2,5 cm (base)
(x1) wooden board 130 x 30 x 2,5 cm (base)
(x2) wooden poles 3 cm diam. – 130 cm (diagonals)
(x2) wooden poles 2 cm diam. – 100 cm (lower diagonals)
(x2) wooden board 55 x 55 x 1 cm (octagon)
(x2) wooden board 40 x 30 x 1 cm (center box)
(x2) wooden board 40 x 23 x 1 cm (center box)
(x2) wooden board 28 x 230 x 1 cm (center box)
(x6) big sheets of 2mm card board(x16) L-brackets
(x1) container craft glue
(x1) hot glue gun
(x1) roll of double-sided tape
(x1) 50 meter roll of white duct tape
(x1) can of black paint
(x1) paint brush
(x3) black spray paint
(x2) white spraypaint
(x1) big sheet of black reflective vinyl
(x10) M8 x 50 bolts
(x10) M8 nuts
(x50) selection of wood screws
(8 m) steel cable
(x8) cable crimps
(x4) cable tensioners
(x8) eye hooks
(x2) Google street view signs
(x1) roof rack
Step 3: Plan overview:
Feel free to make adjustments to the dimensions and go into more detail than we did. As you can see our camera-top came out a little bigger than the original one. The laser scanners (white boxes) are already adjusted to size. They came out too big in relation to the rest.
Step 4: Center box & tube
Mount the center box and saw a hole 11cm in diameter in the center.
Slip it over the tube and attach it with L-brackets and screws.
Cut 2 octogons from the 55 x 55 cm wood boards.
Mount the base octogon on top of the tube with L-brackets.
Paint/spray all black
Step 5: Octagon (no cameras inside!)
Cut the inner and outer octagon walls from the cardboard.
Paint both sides of bothe strips black.
Glue 4 pieces of wood (23 cm) to the inner ring.
Screw and glue the inner ring on the base
Hide the inside with a cylinder of black vinyl
Screw and glue the top octogon.
Clamp the outer ring on.
Mount the finished octogon on the main tube with L-brackets.
Step 6: Laser scanners & control unit
Build the laser scanner boxes from cardboard.
Use white tape or paint to cover them.
Bend a piece of cardboard in the window and cover it with black vinyl.
Mount the 3 boxes to the center box (directions!)
Build the control unit, paint it yellow, and screw it to the rear side of the center box.
Step 7: Mount main pole on base unit
Mount the main pole to the base with L-brackets
Attach rods to the ring on the tube and screw them in the base
Stabilize with flight cables on all 4 corners of the center box to the base.
Add lower diagonals, dish and stand for optical enhancement.
Step 8: Mount the fake camera top onto the car:
Screw 4 holes 8mm in each bar of the roof rack.
Drill the corresponding holes in the wooden base.
Mount the camera top with nuts and bolts to the roof rack
Make sure the roof rack is mounted and sits tight.
Drive carefully and have fun in the city!!!
More pics on fuckflickr here, here and here !